For list of authors, see Credits (Chapter 13).
This document is a specification by the PNG development group. It has been approved by a vote of the group. Future technical changes will require formal approval by a vote of the group. It is the intent of the group to maintain backward compatibility if possible. We will, however, correct any technical deficiencies discovered in the course of developing "beta" implementations.
Comments on this document can be sent to the MNG specification maintainers at one of the following addresses:
Distribution of this memo is unlimited.
At present, the latest version of this document is available on the World Wide Web from
ftp://swrinde.nde.swri.edu/pub/mng/documents/.
In the case of any discrepancy between this extract and the full MNG specification, the full MNG specification shall take precedence.
This document presents the MNG-VLC (Multiple-image Network Graphics, Very Low Complexity) format, which is a proper subset of the MNG (Multiple-image Network Graphics) format.
MNG is a multiple-image member of the PNG (Portable Network Graphics) format family that can contain animations, slide shows, or complex still frames, comprised of multiple PNG single-image datastreams.
The MNG-VLC format uses the same chunk structure that is defined in the PNG specification and shares other features of the PNG format. Any MNG-VLC decoder must be able to decode valid PNG datastreams.
A MNG-VLC frame normally contains a two-dimensional image or a two-dimensional layout of smaller images. It could also contain three-dimensional "voxel" data arranged as a series of two-dimensional planes (or tomographic slices), each plane being represented by a PNG datastream.
This document includes examples that demonstrate various capabilities of MNG-VLC.
If "231" looks like
the number "231"
instead of 2 raised to the power
31, your viewer is not
recognizing the HTML 4.0 <SUP> tag; you need
to look at the HTML 2.0, ASCII text, or PostScript
version of this document instead.
This document presents a very-low-complexity version (MNG-VLC, which is a proper subset) of the MNG (Multiple-image Network Graphics) format.
Note: This specification depends on the PNG (Portable Network Graphics) [PNG] and, for MNG-VLC applications that are enhanced with JNG support, the JNG (JPEG Network Graphics) specifications. The PNG specification is available at the PNG web site,
http://www.libpng.org/pub/png/
and the JNG (JPEG Network Graphics) specification and the full MNG specification are available at the MNG web site,
http://www.libpng.org/pub/png/
A MNG-VLC datastream describes a sequence of zero or more single frames, each of which is composed of a single embedded image, or one single frame that can be composed of zero or more embedded images.
The embedded images can be PNG or JNG datastreams. MNG-VLC datastreams do not contain JNG (JPEG Network Graphics) datastreams, which are allowed in full MNG datastreams, but MNG-VLC applications can be enhanced to recognize and process those as well.
A typical MNG-VLC datastream consists of:
MNG is fundamentally declarative; it describes the elements that go into an individual frame. It is up to the decoder to work out an efficient way of making the screen match the desired composition whenever a nonzero interframe delay occurs. Simple decoders can handle it as if it were procedural, compositing the images into the frame buffer in the order that they appear, but efficient decoders might do something different, as long as the final appearance of the frame is the same.
MNG is pronounced "Ming."
When a MNG datastream is stored in a file, it is recommended that ".mng" be used as the file suffix. In network applications, the Media Type "video/x-mng" can be used. Registration of the media type "video/mng" might be pursued at some future date.
The MNG datastream begins with an 8-byte signature containing
138 77 78 71 13 10 26 10
(decimal) which is similar to the PNG signature with "\212 M N G" instead of "\211 P N G" in bytes 0-3.
Chunk structure (length, name, data, CRC) and the chunk-naming system are identical to those defined in the PNG specification. As in PNG, all integers that require more than one byte must be in network byte order.
The chunk copying rules for MNG employ the same mechanism as PNG, but with rules that are explained more fully in the full MNG specification.
Note that decoders are not required to follow any decoding models described in this specification nor to follow the instructions in this specification, as long as they produce results identical to those that could be produced by a decoder that did use this model and did follow the instructions.
Each chunk of the MNG datastream or of any embedded object is an independent entity, i.e., no chunk is ever enclosed in the data segment of another chunk. MNG-VLC decoders are required to recognize and decode independent PNG datastreams, and any MNG-VLC decoder that has been enhanced to include JNG support is required to recognize and decode independent JNG datastreams.
Because the embedded objects making up a MNG are normally in PNG format, MNG shares the good features of PNG:
In addition:
See also the glossary in the PNG specification and the "terminology" section of the full MNG specification.
When the layers of a frame do not cover the entire area defined by the width and height fields from the MHDR chunk, the layers are composited over the previous frame to obtain the new frame.
An embedded visible PNG or JNG datastream generates a single layer, even though it might be interlaced or progressive.
This chapter describes chunks that can appear at the top level of a MNG datastream.
This section describes critical MNG control chunks that MNG-VLC-compliant decoders must recognize and process ("processing" a chunk sometimes can consist of simply recognizing it and ignoring it; some chunks have been declared to be critical only to prevent them from being relocated by MNG editors).
The MHDR chunk is always first in all MNG datastreams except for those that consist of a single PNG or JNG datastream with a PNG or JNG signature.
The MHDR chunk contains exactly 28 bytes:
Frame width: 4 bytes (unsigned integer).
Frame height: 4 bytes (unsigned integer).
Ticks per
second: 4 bytes (unsigned integer).
Nominal layer
count: 4 bytes (unsigned integer).
Nominal frame
count: 4 bytes (unsigned integer).
Nominal play
time: 4 bytes (unsigned integer).
Simplicity
profile: 4 bytes:(unsigned integer).
bit 0:
1: Absence of certain features is
specified by the remaining bits
of the simplicity profile.
(must be 1 in MNG-VLC datastreams)
bit 1:
0: Simple MNG features are absent.
(must be 0 in MNG-VLC datastreams)
bit 2:
0: Complex MNG features are absent.
(must be 0 in MNG-VLC datastreams)
bit 3:
0: Transparency is absent or can
be ignored. All images in the
datastream can be rendered as
opaque without affecting the
final appearance of any frame.
1: Transparency may be present.
bit 4:
0: JNG and JDAA are absent.
1: JNG or JDAA may be present.
(must be 0 in MNG-VLC datastreams)
bit 5:
0: Delta-PNG is absent.
(must be 0 in MNG-VLC datastreams)
bit 6: Validity flag for bits 7, 8, and 9
0: The absence of background transparency,
semitransparency, and stored objects
is unspecified; bits 7, 8, and 9
have no meaning and must be 0.
1: The possible presence of background
transparency is expressed by bit 7,
semitransparency by bit 8, and the
possible presence of stored objects by
bit 9.
bit 7:
0: Background transparency is absent
or can be ignored
(i.e., the first layer fills the
entire MNG frame with opaque pixels).
1: Background transparency may be
present.
bit 8:
0: Semitransparency (i.e., an image
with an alpha channel that has
values that are neither 0 nor the
maximum value) is absent.
1: Semitransparency may be present.
bit 9:
0: Object buffers need not be stored.
(must be 0 in MNG-LC and MNG-VLC
datastreams)
bits 10-15:
Reserved for public expansion. Must
be zero in this version.
bits 16-30:
Available for private or experimental
expansion. Undefined in this version
and can be ignored.
bit 31:
Must be zero.
Decoders can ignore the "informative" frame-count, layer-count, play-time, and simplicity-profile fields.
The frame_width and frame_height fields
give the intended display size (measured in
pixels) and provide
clipping boundaries.
(see Recommendations for encoders, below).
The ticks_per_second field gives the
framing rate.
It must be nonzero if the datastream contains a sequence of images.
When the datastream contains exactly one frame,
this field should be set to zero.
When ticks_per_second is nonzero,
viewers should display the sequence of frames
at the rate of one frame per tick.
If the frame-count field contains a zero, the frame
count is unspecified. If it is nonzero, it contains the number
of frames that would be displayed, ignoring the
TERM chunk. If the frame count is greater
than 231-1,
encoders should write 231-1, representing an infinite
frame count.
In MNG-VLC datastreams, the frame count is the same as the number of
embedded images in the datastream (or one, the background layer, if there are
no embedded images).
If the layer-count field contains a zero, the layer
count is unspecified. If it is nonzero, it contains the number of
layers in the datastream, ignoring the
TERM chunk.
If the layer count is greater than 231-1, encoders
should
write 231-1, representing an infinite layer count.
In MNG-VLC datastreams, the layer count is the number of embedded images,
plus one (for the background layer).
If the nominal-play-time field contains a zero, the
nominal play time is unspecified. Otherwise, it gives the play time,
in ticks, when the file is displayed ignoring the
TERM chunk.
Authors who write this field should choose a
value of "ticks_per_second" that will allow the nominal play time
to be expressed in a four-bit integer. If the nominal play time is greater
than 231-1 ticks, encoders should write 231-1,
representing an infinite nominal play time.
In MNG-VLC datastreams, the nominal play time is the same as the frame count,
except when the ticks_per_second is zero, in which case the nominal play
time is also zero.
When bit 0 of the simplicity profile is zero, the simplicity (or complexity) of the MNG datastream is unspecified, and all bits of the simplicity profile must be zero. The simplicity profile must be nonzero in MNG-VLC datastreams.
If the simplicity profile is nonzero, it can be regarded as a 32-bit profile, with bit 0 (the least significant bit) being a "profile-validity" flag, bit 1 being a "simple MNG" flag, bit 2 being a "complex MNG" flag, bits 3, 7, and 8 being "transparency" flags, bit 4 being a "JNG" flag, bit 5 being a "Delta-PNG" flag, and bit 9 being a "stored objects" flag. Bit 6 is a "validity" flag for bits 7, 8, and 9, which were added at version 0.98 of this specification. These three flags mean nothing if bit 6 is zero.
If a bit is zero, the corresponding feature is guaranteed to be absent or if it is present there is no effect on the appearance of any frame if it is ignored. If a bit is one, the corresponding feature may be present in the MNG datastream.
The upper 15 bits (except for the most significant bit, which must be zero) are available for private test or experimental versions, and the remaining bits are reserved for future MNG versions, and must be zero in this version.
"Transparency is absent or can be ignored" means that either the PNG tRNS chunk is not present and no PNG or JNG image has an alpha channel, or if they are present they have no effect on the final appearance of any frame and can be ignored (e.g., if the only transparency in a MNG datastream appears in a thumbnail that is never displayed in a frame, or is in some pixels that are overlaid by opaque pixels before being displayed, the transparency bit should be set to zero).
"Semitransparency is absent means that if the PNG tRNS chunk is present or if any PNG or JNG image has an alpha channel, they only contain the values 0 and the maximum (opaque) value. It also means that the JDAA chunk is not present. The "semitransparency" flag means nothing and must be 0 if bit 3 is 0 or bit 6 is 0.
"Background transparency is absent" means that the first layer of every segment fills the entire frame with opaque pixels, and that nothing following the first layer causes any frame to become transparent. Whatever is behind the first layer does not show through.
When "Background transparency" is present, the application is responsible for supplying a background color or image against which the MNG background layer is composited, and if the MNG is being displayed against a changing scene, the application should refresh the entire MNG frame against a new copy of the background layer whenever the application's background scene changes. The "background transparency" flag means nothing and must be 0 if bit 6 is 0. Note that bit 3 does not make any promises about background transparency.
The "stored objects" flag is only useful when bit 2 is nonzero (i.e., "complex MNG features" are present). This flag promises that even though such features are present, no chunk will ever use the information in an existing object buffer; therefore it is not necessary to store an object buffer for any object. An object attributes set is necessary for each object, however. Therefore, the MOVE, CLIP, DISC, deterministic LOOP, partial CLON, and immediately-displayed BASI chunk are permissible. The "stored objects" flag means nothing and must be 0 if bit 2 is 0 or bit 6 is 0.
A MNG-VLC (i.e., a "very low-complexity MNG") datastream must have a simplicity profile with bit 0 equal to 1 and all other bits except possibly for bits 3, 6, 7, and 8 (transparency) equal to zero. If bit 4 (JNG) is 1, the datastream is a "MNG-VLC with JNG" datastream. It might contain a JNG datastream carrying an image or an alpha channel. MNG-VLC decoders are allowed to reject such datastreams unless they have been enhanced with JNG capability.
Encoders that write a nonzero simplicity profile should endeavor to be accurate, so that decoders that process it will not unnecessarily reject datastreams or avoid possible optimizations. For example, the simplicity profile 351 (0x15f) indicates that JNG, critical transparency, semitransparency, and at least one "complex" MNG feature are all present, but Delta-PNG, stored objects, and background transparency are not. This example would not qualify as a MNG-VLC datastream because a "complex" MNG feature might be present. If the simplicity profile promises that certain features are absent, but they are actually present in the MNG datastream, the datastream is invalid.
The MEND chunk's data length is zero. It signifies the end of a MNG datastream.
The LOOP chunk can be ignored by MNG-VLC decoders, along with the ENDL chunk.
A PNG (Portable Network Graphics) datastream.
See the PNG specification [PNG] and the Extensions to the PNG Specification document [PNG-EXT] for the format of the PNG chunks.
The IHDR and IEND chunks and any chunks between them are written and decoded according to the PNG specification, except as extended in this section. These extensions do not apply to standalone PNG datastreams that have the PNG signature, but only to PNG datastreams that are embedded in a MNG datastream that begins with a MNG signature.
A JNG (JPEG Network Graphics) datastream.
See the JNG specification for the format of the JNG datastream.
The JHDR and IEND chunks and any chunks between them are written and decoded according to the JNG specification.
The remaining discussion in the previous paragraph about PNG datastreams also applies to JNG datastreams.
MNG-VLC applications are not expected to process JNG datastreams unless they have been enhanced with JNG capability.
The BACK chunk suggests a background color against which transparent or less-than-full-frame images can be displayed.
The BACK chunk contains 6, 7, 9, or 10 bytes. If any field is omitted, all remaining fields must also be omitted.
Red_background: 2 bytes (unsigned integer).
Green_background: 2 bytes (unsigned integer).
Blue_background: 2 bytes (unsigned integer).
Mandatory
background: 1 byte (unsigned integer).
0: Background color is advisory.
Applications can use it if they
choose to.
1: Background color is mandatory.
Applications must use it.
This byte can be omitted. If so,
the background color is advisory.
Viewers are expected to composite the first layer in the MNG-VLC datastream against a background layer that fills the entire frame. The BACK chunk provides a background that the viewer can use for this purpose. If it is not "mandatory" the viewer can choose another background if it wishes. If the BACK chunk is not present, the viewer must provide its own background for the first subframe. Each layer after the first must be composited over the layers that precede it.
The three BACK components are always written as though for an RGBA PNG with 16-bit sample depth. For example, a mid-level gray background could be specified with (0x9999, 0x9999, 0x9999). The background color is interpreted in the current color space as defined by any top-level gAMA, cHRM, iCCP, sRGB chunks that have appeared prior to the BACK chunk in the MNG datastream. If no such chunks appear, the color space is unknown.
Multiple instances of the BACK chunk are permitted in a MNG datastream.
The BACK chunk can be omitted. If a background is needed and the BACK chunk is omitted, then the viewer must supply its own background. For the purpose of counting layers, such a viewer-supplied background layer is counted the same as a background supplied by the BACK chunk.
In practice, most applications that use MNG as part of a
larger composition should ignore the BACK data if
mandatory_background=0 and the application already has
its own background definition. This will frequently be the case in
World Wide Web pages, to achieve nonrectangular transparent animations
displayed against the background of the page.
The TERM chunk suggests how the end of the MNG datastream should be handled, when a MEND chunk is found. It contains either a single byte or ten bytes:
Termination
action: 1 byte (unsigned integer)
0: Show the last frame indefinitely.
1: Cease displaying anything.
2: Show the first frame after the TERM
chunk.
3: Repeat the sequence starting
immediately after the TERM chunk
and ending with the MEND chunk.
Action after
iterations: 1 byte
0: Show the last frame indefinitely after
iteration_max iterations have been
done.
1: Cease displaying anything.
2: Show the first frame after the TERM
chunk.
This and the remaining fields must be
present if termination_action is 3, and
must be omitted otherwise.
Delay: 4 bytes (unsigned integer). Delay, in
ticks, before repeating the sequence.
Iteration max: 4 bytes (unsigned integer). Maximum
number of times to execute the sequence.
Infinity is represented by 0x7fffffff.
The TERM chunk, if present, must appear either immediately after the MHDR chunk or immediately prior to a SEEK chunk. Only one TERM chunk is permitted in a MNG datastream.
Simple viewers and single-frame viewers can ignore the TERM chunk. It has been made critical only so MNG editors will not inadvertently relocate it.
Simple decoders that only read MNG datastreams sequentially can safely ignore the SAVE and SEEK chunks.
This section describes ancillary MNG chunks. MNG-compliant decoders are not required to recognize and process them.
The eXPI chunk takes a snapshot of an image, associates the name with that snapshot, and makes the name available to the "outside world" (like a scripting language).
The chunk contains an object identifier (snapshot id) and a name:
Snapshot id: 2 bytes (unsigned integer).
(must be zero in MNG-VLC
datastreams)
Snapshot name: 1-79 bytes (Latin-1 text).
When the snapshot_id is zero, the snapshot is the first instance of an embedded image following the eXPI chunk.
Note that the snapshot_name is associated with the
snapshot, not with the snapshot_id nor its future contents;
changing the image identified by snapshot_id will not
affect the snapshot.
The snapshot_name means nothing inside the scope of the
MNG-VLC specification.
If two eXPI chunks use the same name, it is the outside world's
problem (and the outside world's prerogative to regard it as an error).
It is recommended, however, that the snapshot_name not be
the same as that appearing in any other eXPI
chunk. A decoder that knows of no
"outside world" can simply ignore the eXPI chunk. This
chunk could be used in MNG datastreams that define libraries of related
images, rather than animations, to allow applications to extract
images by their snapshot_id.
Names beginning with the word "thumbnail" are reserved for snapshot images that are intended to make good icons for the MNG. Thumbnail images are regular PNG images, but they would normally have smaller dimensions and fewer colors than the MNG frames.
The snapshot_name string must follow the format of a
tEXt keyword: It must consist only of printable Latin-1
characters and must not have leading or trailing blanks, but can have
single embedded blanks. There must be at least one and no more than
79 characters in the keyword. Keywords are case-sensitive. There is
no null byte terminator within the snapshot_name string,
nor is there a separate null byte terminator. Snapshot names should
not begin with the case-insensitive strings
"CLOCK(", "FRAME(", or "FRAMES("
which are reserved for use in URI queries and
fragments.
Multiple instances of the eXPI chunk are permitted
in a MNG datastream, and they need not have different values of
snapshot_id.
The MNG pHYg chunk is identical in syntax to the PNG pHYs chunk. It applies to complete MNG layers and not to the individual images within them. MNG datastreams can include both the pHYs chunk (either at the MNG top level or within the PNG and JNG datastreams) and the pHYg chunk (only at the MNG top level), to ensure that the images are properly displayed either when displayed by a MNG viewer or when extracted into a series of individual PNG or JNG datastreams and then displayed by a PNG or JNG application. The pHYs and pHYg chunks would normally contain the same values, but this is not necessary.
The MNG top-level pHYg chunk can be nullified by a subsequent empty pHYg chunk appearing in the MNG top level.
The namespace for MNG chunk names is separate from that of PNG. Only those PNG chunks named in this paragraph are also defined at the MNG top level. They have exactly the same syntax and semantics as when they appear in a PNG datastream:
A MNG editor that writes PNG datastreams should not include the top-level iTXt, tEXt, tIME, and zTXt chunks in the generated PNG datastreams.
These PNG chunks are also defined at the MNG top level. They provide default values to be used in case they are not provided in subsequent PNG datastreams. Any of these chunks can be nullified by the appearance of a subsequent empty chunk with the same chunk name. Such empty chunks are not legal PNG or JNG chunks and must only appear in the MNG top level.
In the MNG top level, all of these chunks are written as though for 16-bit RGBA PNG datastreams. Decoders are responsible for reformatting the chunk data to suit the actual bit depth and color type of the datastream that inherits them.
A MNG editor that writes PNG or JNG datastreams is expected to
include the top-level cHRM, gAMA, iCCP,
and sRGB chunks in the generated PNG or JNG datastreams, if
the embedded image does not contain its own chunks that define the
color space. When it writes the sRGB chunk, it should write
the gAMA chunk (and perhaps the cHRM chunk), in
accordance with the PNG specification, even though no gAMA or
cHRM chunk is present in the MNG datastream.
It is also expected to write the pHYs chunk and the reformatted
top-level bKGD chunk in the generated PNG or JNG datastreams, and
the reformatted sBIT chunk only in generated PNG datastreams, when
the datastream does not have its own bKGD, pHYs,
or sBIT chunks.
The top-level sRGB chunk nullifies the preceding
top-level gAMA and cHRM chunks, if any, and
either the top-level gAMA or the top-level cHRM chunk
nullifies the preceding top-level sRGB chunk, if any.
JNG (JPEG Network Graphics) is the lossy sub-format for MNG objects. It is described in the full MNG specification and is also available as a separate extract from the full MNG specification. Both documents are available at the MNG home page,
http://www.libpng.org/pub/png/
MNG-VLC applications can choose to support JNG or not. Those that do not can check bit 4 (JNG is present/absent) of the MHDR simplicity profile to decide whether they can process the datastream.
The chunk copying rules for MNG are similar to those in PNG. Authors of MNG editing applications should consult the full MNG specification for details.
This section specifies the minimum level of support that is expected of MNG-VLC-compliant decoders, and provides recomendations for viewers that will support slightly more than the minimum requirements. All critical chunks must be recognized, but some of them can be ignored after they have been read and recognized. Ancillary chunks can be ignored, and do not even have to be recognized.
Applications that provide less than minimal MNG support should check the MHDR "simplicity profile" for the presence of features that they are unable to support or do not wish to support. A specific subset, in which "complex MNG features", "simple MNG features" and JNG are absent, is called "MNG-VLC". In MNG-VLC datastreams, bit 0 of the simplicity profile must be 1 and bits 1, 2, and 4 must be 0.
Subsets are useable when the set of MNG datastreams to be processed is known to be (or is very likely to be) limited to the feature set in MNG-VLC. Limiting the feature set in a widely-deployed WWW browser to anything less than MNG with 8-bit JNG support would be highly inappropriate.
Some subsets of MNG support are listed in the following table, more or less in increasing order of complexity.
Level of support MHDR Profile bits Profile
31-10 9 8 7 6 5 4 3 2 1 0 value
MNG-VLC without transparency 0 0 0 0 1 0 0 0 0 0 1 65
MNG-VLC 0 0 1 1 1 0 0 1 0 0 1 457
MNG-VLC with JNG 0 0 1 1 1 0 1 1 0 0 1 473
One reasonable path for an application developer to follow might be to develop and test the application at each of the following levels of support in turn:
An equally reasonable development path might be
On the other hand, a developer working on an application for storing multi-page fax documents might have no need for more than "MNG-VLC without transparency".
ticks_per_second must be supported by animation viewers.
The simplicity profile, frame count, layer count, and nominal play time
can be ignored. Decoders that provide less than minimal support can use
the simplicity profile to identify datastreams that they are incapable
of processing.
color_type, bit_depth,
compression_method, filter_method and
interlace_method must be supported (interlacing, as in PNG,
need not necessarily be displayed on-the-fly; the image can be displayed
after it is fully decoded). The alpha-channel must be supported, at
least to the degree that fully opaque pixels are opaque and fully
transparent ones are transparent. It is recommended that alpha be fully
supported. Alpha is not present (or can be ignored because it has no
effect on the appearance of any frame) if bit 3 of the simplicity profile is 0.
Bit 4 of the simplicity profile can be used to promise that JNG chunks are not present. Viewers that choose not to support JNG can check this bit before deciding to proceed. MNG-VLC decoders are not required to support JNG.
color_type, bit_depth,
compression_method, filter_method and
interlace_method must be supported (interlacing, as in PNG,
need not necessarily be displayed on-the-fly; the image can be displayed
after it is fully decoded). The alpha-channel must be supported, at
least to the degree that fully opaque pixels are opaque and fully
transparent ones are transparent. It is recommended that alpha be fully
supported.
image_sample_depth=8 must be supported. The JSEP
chunk must be recognized and must be used by minimal decoders to select
the eight-bit version of the image, when both eight-bit and twelve-bit versions
are present, as indicated by image_sample_depth=20 in the
JHDR chunk. When image_sample_depth=12, minimal
decoders are not obligated to display anything. Such decoders can
choose to display nothing or an empty rectangle of the width and height
specified in the JHDR chunk.
The following recommendations do not form a part of the specification.
It is a good idea to use a single color space for all of the layers in an animation, where speed and fluidity are more important than exact color rendition. This is best accomplished by defining a single color space at the top level of MNG, using and either an sRGB chunk or the gAMA and cHRM chunks and perhaps the iCCP chunk, and removing any color space chunks from the individual images after converting them to the common color space.
When the encoder converts all images to a single color space before putting them in the MNG datastream, this will allow decoders to improve the speed and consistency of the display.
For single-frame MNG datastreams, however, where decoding speed is less important and exact color rendition might be more important, it is best to leave the images in their original color space, as recommended in the PNG specification, to avoid any loss of data due to conversion, and to retain the individual color space chunks if the images have different color spaces.
The simplicity profile in the MHDR chunk can be ignored or it can be used for
When a fatal error is encountered, such as a bad CRC or an unknown critical MNG chunk, minimal viewers should simply abandon the MNG datastream.
Decoders are required to be able to interpret datastreams that contain interlaced PNG images, but are only required to display the completed frames; they are not required to display the images as they evolve. Viewers that are decoding datastreams coming in over a slow communication link might want to do that, but MNG authors should not assume that the frames will be displayed in other than their final form.
When a PLTE chunk is received, it only affects the display of the PNG datastream that includes it. Decoders must take care that it does not retroactively affect anything that has already been decoded.
If a frame contains two or more images, the PLTE chunk in one image does not affect the display of the other.
A composite frame consisting only of indexed-color images should not be assumed to contain 256 or fewer colors, since the individual palettes do not necessarily contain the same set of colors.
Viewers that can only display a single frame must display the first frame that they encounter.
MNG-VLC provides the following types of clipping, in addition to any clipping that might be required due to the physical limitations of the display device.
frame_width and frame_height are defined in
the MHDR chunk and cannot be changed by any other MNG chunk.
This is the only type of clipping available in MNG-VLC datastreams.
Decoders can use these parameters to establish the size of
a window in which to display the MNG frames. When the frame_width
or frame_height exceeds the physical dimensions of the
display hardware, the contents of the area outside those dimensions is
undefined. If a viewer chooses, it can create "scroll bars" or the
like, to enable persons to pan and scroll to the offscreen portion
of the frame. If this is done, then the viewer is responsible for
maintaining and updating the offscreen portion of the frame.
In the case of a MNG datastream that consists of a PNG or JNG
datastream, with the PNG or JNG signature, the frame_width
and frame_height are defined by the width and
height fields of the IHDR (or JHDR) chunk.
The clipping boundaries are expressed in pixels, measured rightward and downward from the frame origin.
The left and top clipping boundaries are inclusive and the right and bottom clipping boundaries are exclusive, i.e., the pixel located at {x,y} is only displayed if the pixel falls within the physical limits of the display hardware and all of the following are true:
0 <= x < frame_width (from the MHDR chunk) 0 <= y < frame_height
On systems where file names customarily include an extension
signifying file type, the extension .mng is recommended for
MNG (including MNG-VLC)
files. Lowercase .mng is
preferred if file names are case-sensitive. The extension .jng is
recommended for JNG files.
Released 01 October 2000
Separated the "transparency" profile bit into "transparency", "semitransparency", and "background transparency", and adds discussion of "background transparency" to the BACK chunk specification. This proposal was approved by a formal vote.
Added a "validity" flag to maintain backward compatibility of the simplicity profile. If it is zero, then the "background transparency", "semitransparency", and "stored objects" flags do not make any promises.
Global sRGB nullifies global gAMA and cHRM, and vice versa.
Added a note that top-level color-space chunks do not have any effect on already-decoded objects.
Added terminology entries for "animation", "framing rate", "iteration", and "nullify".
URLs were changed to "libpng.org".
Instances of "mpng-list" were updated to "mng-list".
Revised the MNG-VLC definition to include the possibility of the new transparency flags and the new validity flag being set.
Released 28 February 2000.
Minor editorial changes only.
Released 18 July 1999.
Initial public release, approved by the PNG Development Group on 11 May 1999.
Security considerations are addressed in the PNG specification.
Some people may experience epileptic seizures when they are exposed to certain kinds of flashing lights or patterns that are common in everyday life. This can happen even if the person has never had any epileptic seizures. All graphics software and file formats that support animation and/or color cycling make it possible to encode effects that may induce an epileptic seizure in these individuals. It is the responsibility of authors and software publishers to issue appropriate warnings to the public in general and to animation creators in particular.
No known additional security concerns are raised by this format.
We use the "#" character to denote commentary in these examples; such comments are not present in actual MNG datastreams.
The simplest MNG datastream is a single-image PNG datastream. The simplest way to create a MNG from a PNG is:
copy file.png file.mng
The resulting MNG file looks like:
\211 P N G \r \n ^z \n # PNG signature. IHDR 720 468 8 0 0 0 0 # Width and Height, etc. sRGB 2 gAMA 45455 IDAT ... IEND
If file.png contains an sRGB chunk and also gAMA and cHRM chunks that are recommended in the PNG specification for "fallback" purposes, you can remove those gAMA and cHRM chunks from file.mng because any MNG viewer that processes the gAMA chunk is also required to recognize and process the sRGB chunk, so those chunks will always be ignored. Any MNG editor that converts the MNG file back to a PNG file is supposed to insert the recommended gAMA and cHRM chunks.
This example demonstrates a very simple movie, such as might result from directly converting an animated GIF that contains a simple series of full-frame images:
\212 M N G \r \n ^z \n # MNG signature.
MHDR 256 300 # Width and height.
1 # 1 tick per second.
5 4 4 # Layers, frames, play time
1 # MNG-VLC simplicity
TERM 3 0 120 10 # When done, repeat animation 10 times.
IHDR ... IDAT ... IEND # Four PNG datastreams
IHDR ... IDAT ... IEND # are read and displayed.
IHDR ... IDAT ... IEND
IHDR ... IDAT ... IEND
MEND
These examples in the full MNG specification use features that are not available in MNG-VLC.
Here is an example of storing a library of icons in a MNG-VLC datastream. All of the icons use the same "sRGB" colorspace, so a global sRGB chunk appears at the beginning. The eXPI chunks allow applications to extract the images by name.
MHDR 96 96 1 6 5 5 9 # Profile 9 is MNG-VLC sRGB 2 # Global sRGB eXPI 0 "thumbnail" IHDR 32 32 ... PLTE ... tRNS 0 IDAT ... IEND eXPI 0 "left arrow" IHDR 96 96 ... PLTE ... tRNS 0 IDAT ... IEND eXPI 0 "right arrow" IHDR 96 96 ... PLTE ... tRNS 0 IDAT ... IEND eXPI 0 "up arrow" IHDR 96 96 ... PLTE ... tRNS 0 IDAT ... IEND eXPI 0 "down arrow" IHDR 96 96 ... PLTE ... tRNS 0 IDAT ... IEND MEND
Contributors' names are presented in alphabetical order:
This document was built from the file mng-master-20001001 on 02 October 2000.
Copyright © 1998, 1999, 2000 by: Glenn Randers-Pehrson
This specification is being provided by the copyright holder under the following license. By obtaining, using and/or copying this specification, you agree that you have read, understood, and will comply with the following terms and conditions:
Permission to use, copy, and distribute this specification for any purpose and without fee or royalty is hereby granted, provided that the full text of this NOTICE appears on ALL copies of the specification or portions thereof, including modifications, that you make.
THIS SPECIFICATION IS PROVIDED "AS IS," AND COPYRIGHT HOLDER MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SPECIFICATION WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. COPYRIGHT HOLDER WILL BEAR NO LIABILITY FOR ANY USE OF THIS SPECIFICATION.
The name and trademarks of copyright holder may NOT be used in advertising or publicity pertaining to the specification without specific, written prior permission. Title to copyright in this specification and any associated documentation will at all times remain with copyright holder.